Editorial desk
3D Filament Guide Editorial
3D Filament Guide Editorial is the publishing identity for 3D Filament Guide. It is a desk, not a person: no named author, no biography, no professional certifications.
Articles published under this byline are researched from primary sources — vendor and project documentation, published standards and specifications, research papers, and measurements published by whoever took them — drafted with AI assistance, and edited against those cited sources before publication. Nothing here is based on first-hand testing in a private lab, and any figure that appears is attributed to the source it came from.
Corrections go to editor@3dfilamentguide.com. More detail is on the about page and the editorial disclosure.
Posts (8)
- comparisons
ABS vs ASA for Printing: Settings, Strength and Fumes
ASA beats ABS outdoors and emits less styrene at near-identical print settings. Data-sheet numbers, starting profiles and where ABS still wins.
- material-selection
Best Filament for Outdoor Use: ASA vs PETG vs PLA
Why ASA is the default for parts that live in sunlight: published weathering data on ASA, PETG, PLA and ABS, plus print settings and a coupon test.
- troubleshooting
Wet Filament Symptoms and How to Fix Them: PLA, PETG and TPU
Identify moisture-related popping, stringing and pitted walls, use manufacturer drying temperatures, and verify the fix with a repeat print before tuning
- comparisons
PLA Plus vs Regular PLA Explained: What the Plus Buys
PLA+ trades stiffness and a little tensile strength for 5 to 12 times the impact toughness. Data-sheet numbers, the settings to change, and how to check.
- buying-guides
Best Filament for Beginners: What to Buy First
PLA is the right first filament for nearly every FDM printer. What to buy, which diameter, how much, and the spool details that actually matter.
- drying-and-storage
How to Dry Filament: Drying Chart by Material
Use a filament drying chart with temperatures, hours and recipe limits by material, then choose a drying method and keep the recovered spool dry.
- comparisons
PLA vs PETG vs ABS: Which Filament to Use
A spec-based comparison of PLA, PETG and ABS covering print temperatures, warping, enclosure needs, heat resistance, and what each material is for.
- materials
Filament Density: Convert Spool Weight to Length
How filament density converts spool weight into printable length, why net spool weight matters, and how absorbed moisture ruins otherwise good material.